Body, sleeve, Stem, pinch rod, side guide rod, Hand wheel etc.
when rotate the handle clockwise, valve stem drive the splint and compress sleeving to close valve, conversely, open the valve. So splint under the pull rod upper and downer to complete the work, because of the rubber sleeve can not sustain heavy strength, so when close it, operator feel a little collide is be ok, forbid to use other tools;
This valve can install on the pipe for free, no fluent direction limit, long term usage, if there is abrasion or leaks, just to remove the valve to replace a new valve core, the valve can use for a long time for economical and practical.
A.Could install it in any part of pipe and don’t limit of the medium flow direction.
B.Low maintenance cost, don’t need change the seat of valve, sealing material etc, only need change the rubber of sleeving.
A.Pinch valves can be used for On/Off, as well as throttling services
B.Pinch valves are ideal for on/off services because of their straight through design that allows for uninhibited flow
C.Straight through designs also have very little pressure drop between the inlet and outlet.
D.The effective throttling range of a pinch valve is usually between 10% and 95% of the rated flow capacity
E.Low maintenance
F.Low weight and easy operation
G.Easy changing the rubber sleeving and don’t need stock other parts except the rubber sleeving.
| Rubber quality | Application examples | Temperature range | Typical media |
| EPDM | Chemical applications: Applicable to 75% of all industrial chemical applications. | -40℃ – ＋110℃ | Concentrated and oxidiziing chemicals. |
| NR | High wear applications. | -40℃ – ＋80℃ | Abrasive materials, diluted acids, alkali & chemicals. |
| NBR | Applications involving oils, fats and hydrocarbon. | -30℃ – ＋100℃ | Oil, fats, fuels hydrocarbon, lubricants. |
| CR | Special-purpse chemical application: Resilient to ozone and averse weather | -40℃ – ＋100℃ | Chemicals, acids, several solvents, aliphatic oils, fats, lubricants |
| IIR | Special-purpse chemical application: Impermeable to gas | -40℃ – ＋100℃ | Concentrated and acidic chemicals, vegetable oil. |
| Name | Material |
| Body | Aluminium alloy, Cast steel, Stainless steel |
| Sleeve | NR, EPDM, NBR, CR, IIR |
| Acceptable other special requirements of the material | |
| DN | PN(Bar) | L | H | D | K | N-L |
| 40 | 1-16 | 150 | 40 | 145 | 110 | 4-18 |
| 50 | 1-16 | 180 | 60 | 160 | 125 | 4-18 |
| 65 | 1-16 | 180 | 60 | 180 | 145 | 4-18 |
| 80 | 1-16 | 220 | 75 | 195 | 160 | 4-18 |
| 100 | 1-16 | 280 | 95 | 215 | 180 | 8-18 |
| 125 | 1-10 | 345 | 120 | 245 | 210 | 8-18 |
| 150 | 1-10 | 414 | 145 | 280 | 240 | 8-23 |
| 200 | 1-6 | 550 | 182 | 335 | 295 | 8-23 |
| 250 | 1-6 | 680 | 229 | 395 | 350 | 12-23 |
| 300 | 1-4 | 820 | 278 | 440 | 400 | 12-23 |
This valve is composed of valve body, rubber tube sleeve, valve cover and other parts.
When the control medium is not input, the cavity between the rubber tube sleeve and the national body communicates with the atmosphere, and the rubber sleeve is in a state of outward tension due to fluid pressure, because there are reinforced ply layers arranged at an angle in the tube sleeve, so that the axial and radial pressures of the tube are balanced with each other, so the length and diameter of the tube sleeve will not change due to fluid pressure. When the control medium enters the cavity between the tube sleeve and the national body, the rubber tube sac is deformed and flowed under the pressure of the medium.
①the valve is installed at will on the pipeline, and there is no restriction on the flow direction of the medium. ②the maintenance cost of the valve is low.Just replace the rubber tube sleeve according to the actual use situation
Our pinch valve sleeve materials currently include Linke’s patented 38-series Nadiflex composite rubber, Q-grade NR natural rubber jointly sourced from Lanxess and Mitsui, EPDM ethylene propylene rubber, SI6501 high molecular silicone rubber, and NBR nitrile rubber. Additionally, we offer specialized pinch valve sleeve materials such as Hypalon rubber, CR-grade chloroprene rubber, and B-grade IIR butyl […]
The fluorine-lined butterfly valve is engineered for aggressive chemical and ultra-pure applications. Its fluorine lining resists chemical attack from various compounds, while a flexible 360-degree backup liner ensures bubble-tight shut-off. This maintenance-free valve features redundant shaft seals, a 90-degree clockwise operation, and zero leakage. Main parts and materials Name/Material WCB CF8 CF3 CF8M CF3M Body […]
Y type Strainer is an indispensable filter device in the pipeline system of conveying media made by stainless steel. It is usually installed at the inlet end of pressure reducing valve, pressure relief valve, fixed level valve or other equipment to remove impurities in the media to protect the normal use of valves and equipment. The characteristics include advanced structure, low resistance, convenient blowdown and so on. Applicable media can be water, oil, gas. Generally, the water network is 18 to 30 mesh, the ventilation network is 10 to 100 mesh, and the oil network is 100 to 480 mesh. Main parts and materials Name/Material WCB CF8 CF3 CF8M CF3M Body WCB CF8 CF3 CF8M CF3M Screen SS304 SS304 SS304L SS316L SS316L Bolt/Nut B7/2H B8/8 B8/8 B8M/8M B8M/8M Gasket PTFE、NBR、Metal Wound Graphite Filter Fineness 10Mesh ~ 400Mesh Flange Standard JIS、ASME、DIN、BS、GB Pressure 0.6Mpa ~ […]
The stainless steel flanged ball valve operates using a spherical closure element (the ball) that rotates around its axis, enabling quick opening and closing actions. This valve features flanged connections, allowing it to be easily mounted to piping systems. Key Features Operation Mechanism Fluid Regulation and Control Hard Seal V-Type Ball Valve Multi-Pass Functionality Installation […]
