September 29,2026
Roy

Valve installation looks simple on paper—until you’re on-site, the flanges don’t line up, and the process fluid is waiting. In reality, poor installation is one of the leading causes of premature valve failure, leakage, and costly downtime. Whether you’re working with a vanne revêtue, a passoire, or a vanne à pincement, the same fundamental rules apply. This guide walks through the most frequent mistakes and how to avoid them.

Vanne Lianke

1. Misalignment and Over-Torquing

One of the most common issues is forcing a valve into a pipeline that doesn’t align naturally. This puts stress on the valve body and can crack the lining—especially critical for a vanne revêtue. A lined valve is designed to resist aggressive chemicals, but the PTFE or PFA lining is vulnerable to mechanical damage. Always support the pipe on both sides and never use the valve bolts to pull flanges together.

Over-torquing flange bolts is another silent killer. It compresses gaskets unevenly and can distort the valve seat. Use a calibrated torque wrench and follow the manufacturer’s tightening sequence, usually a star pattern.

Vanne à pincement pneumatique robuste

Notre vanne à pincement pneumatique haute performance est conçue pour les applications industrielles exigeantes. Elle offre un excellent contrôle des fluides abrasifs et corrosifs, garantit une étanchéité fiable, un entretien minimal et une longue durée de vie. Idéale pour les systèmes de boues, de produits chimiques et d'eaux usées.,

Voir plus de détails
Vanne à pincement pneumatique robuste

2. Ignoring Flow Direction

Many valves are directional. A vanne à pincement is often bidirectional, but some designs perform better with flow in a specific direction to extend sleeve life. Similarly, a passoire must be installed with the flow entering the designated inlet—otherwise, debris won’t be captured properly, and the screen or basket may collapse.

Always check the arrow on the valve body. If there’s no arrow, consult the manual. Installing a strainer backward is a common mistake that leads to clogged downstream equipment and unnecessary pressure drop.

3. Poor Support and Vibration

Valves are not pipe supports. A heavy vanne revêtue or a large vanne à pincement hanging unsupported will eventually develop leaks at the flange joints. Vibration from pumps or compressors accelerates fatigue. Install pipe hangers or brackets within one pipe diameter of the valve on both sides.

For a passoire, vibration can cause the basket or screen to loosen, allowing bypass of unfiltered fluid. Use a mounting bracket if the strainer is inline and heavy.

Passoire par LIANKE

Filtres industriels par LIANKE

Filtration fiable pour protéger les vannes et les canalisations — types Y, T, panier et duplex disponibles.

Explorez les crépines
Filtre industriel LIANKE

4. Incorrect Gasket Selection

Using the wrong gasket material is a recipe for leaks. For a vanne revêtue, the gasket must be compatible with both the lining and the process fluid. Spiral-wound gaskets with PTFE filler are common, but full-face gaskets are preferred for fragile linings to distribute bolt load evenly.

For a vanne à pincement, the sleeve is the sealing element—no gasket is needed at the flange, but the flange faces must be clean and flat. For a passoire, check that the housing gasket matches the O-ring or flat gasket specified; otherwise, bypass leakage occurs.

5. Neglecting Commissioning and Maintenance Access

A valve installed in a location that’s impossible to reach for maintenance is a future headache. Leave enough space to remove the actuator, replace the vanne à pincement sleeve, or change the passoire screen or basket. For a vanne revêtue, ensure the handle or actuator can be operated without obstruction.

During commissioning, open and close each valve several times to verify smooth operation. For a passoire, record the initial pressure drop. For a vanne à pincement, check that the sleeve is not pinched or twisted.

6. Forgetting Thermal Expansion

Pipelines expand and contract with temperature changes. If a vanne revêtue is rigidly anchored between two fixed points, the thermal stress can crack the lining. Use expansion joints or loops. A vanne à pincement with an elastomeric sleeve is more forgiving, but it still needs room to move.

Réflexions finales

Most valve installation problems come down to three things: alignment, support, and following the manual. Whether you’re installing a vanne revêtue for corrosive service, a passoire to protect downstream equipment, or a vanne à pincement for abrasive slurries, taking the time to do it right saves money and downtime.

BLOG RECOMMANDÉ
October 29,2026
Roy
Why Choose Imported Industrial Valves for Harsh Working Conditions?

In heavy industries such as petroleum refining, fine chemical engineering, thermal power generation, and coal chemical industry, production systems continuously operate under harsh conditions: high temperature, high pressure, strong corrosion, high-speed fluid scouring, and flammable & explosive media. As core pressure-bearing components of pipeline fluid control systems, industrial valves directly affect operational safety, maintenance costs, […]

En savoir plus
October 29,2026
Roy
How to Clean Sulfuric Acid Anti-Corrosion Storage Tanks

Anti-corrosion tanks are ideal equipment for storing corrosive liquids, and they are commonly used to contain different concentrations of acids and alkalis including sulfuric acid and hydrochloric acid. Special methods and techniques are required for cleaning sulfuric acid storage tanks. Due to the strong corrosivity of sulfuric acid, operators need to stay cautious and wear […]

En savoir plus
October 21,2026
Roy
Lianke Valve Becomes a Member Unit of Wenzhou Chief Engineer Research Association

Recently, the 2nd Session of the 12th Member Congress of Wenzhou Chief Engineer Research Association was successfully held. At the meeting, Linko Valve Co., Ltd. officially joined the association as a member unit. This marks a major step forward for the enterprise in technological research & development and industry-university-research cooperation. Going forward, Linko Valve will […]

En savoir plus
October 21,2026
Roy
Precision Valve Welding Craftsmanship | Superior Manual Welding at LIANKE Valve

In the professional production workshop of LIANKE Valve, a professional team of senior craftsmen devotes themselves to high-precision valve welding manufacturing. With skilled operation of welding torches and precise flame control, our experienced welders create firm, flawless weld seams for every valve body, building a solid and durable structural barrier for industrial valve products. Every […]

En savoir plus
POUR PLUS D'INFORMATIONS
CONTACTEZ-NOUS
Contactez Lianke +