What matters should be paid attention to in the installation of pneumatic butterfly valve

Pneumatic butterfly valve is composed of pneumatic actuator and butterfly valve. Pneumatic butterfly valve is a pneumatic valve that uses a circular butterfly plate that rotates with the valve stem to open and close to realize the activation action. Increasing use on medium diameter pipes. Precautions for installation of pneumatic butterfly valve: 1. Before installation, check that all parts of the pneumatic butterfly valve are not missing, the model is correct, check that there is no debris in the valve body, and that there is no obstruction in the solenoid valve and muffler 2. Put the valve and cylinder in the closed state. 3. Install the cylinder on the valve (the installation direction can be parallel or perpendicular to the valve body), and then check whether the screw holes are aligned, there will not be much deviation, if there is a little deviation, just turn the cylinder body a little. , and then tighten the screws. 4. After the installation is completed, debug the pneumatic butterfly valve (the air supply pressure is 0.4~0.6MPa under normal conditions), and the solenoid valve must be manually opened and closed during commissioning and operation (the solenoid valve coil can only be operated manually after the power is turned off), Observe the opening and closing of the pneumatic butterfly valve. If it is found during the debugging operation that the valve is a little difficult at the beginning of the opening and closing process, and then normal, the cylinder stroke needs to be reduced (adjust the stroke adjustment screws at both ends of the cylinder a little at the same time, and the valve needs to be run to the open position during adjustment. , then turn off the air source and adjust it again) until the valve opens and closes smoothly and closes without leakage. It should also be noted that the adjustable muffler can adjust the opening and closing speed of the valve, but it cannot be adjusted too small, otherwise the valve may not move. 5. Defa should be kept dry before installation, and should not be stored in the open air. 6. Before installing the butterfly valve, check the pipeline to ensure that there is no foreign matter such as welding slag in the pipeline. 7. The manual opening and closing resistance of the butterfly valve body is moderate, and the butterfly valve torque and the selected actuator torque match. 8. The flange specification for butterfly valve connection is correct, and the pipe wafer flange is in line with the butterfly valve flange standard. It is recommended to use special flanges for butterfly valves, and do not use flat welding flanges. 9. Confirm that the flange welding is correct. After the butterfly valve is installed, do not weld the flange again to avoid scalding the rubber parts. 10. The installed pipeline flange should be centered and aligned with the butterfly valve placed in it. 11. Install all flange bolts and tighten them by hand to confirm that the butterfly valve and the flange are aligned, and then carefully open and close the butterfly valve to ensure flexible opening and closing. 12. Fully open the valve, and use a wrench to tighten the bolts in diagonal order without washer. Do not over-tighten the bolts to prevent serious deformation of the valve ring and excessive opening and closing torque.
Lianke Valve Co.,Ltd. is recognized as one of the leading manufacturer of in China.Trust in us and make Lianke Valve Co.,Ltd. your valve application supplier. Our products will bring more economic value to you.
As a global valve application company, we take on some of the world’s biggest valve application challenges. Lianke Valve Co.,Ltd. have a whole series of types of industrial valves valve application that can solve your valve application problem in an effective manner. Check it at Lianke Valve.
Lianke Valve Co.,Ltd. is an expert in manufacturing a wide range of . We also have high quality types of industrial valves and many others. Visit to know more.
Using high technology, valve application showed its competitive advantages, captioned with information about the company's commitment to providing safe, reliable, profitable jobs to local artisans.
Lianke Valve Co.,Ltd. affords you a suitable low price for proving our ethical considerations.