The body is made of ductile iron, which is about 20%-30% lighter than the traditional gate valve
, and is easy to install and maintain. Traditional gate valves often accumulate in the groove at the bottom of the valve due to foreign objects such as stones, wood blocks, cement, iron filings, sundries, etc. after the pipe is washed with water, which is easy to cause the phenomenon of water leakage that cannot be closed tightly, and the elastic seat fills the bottom of the gate valve. It adopts the same flat bottom design as the water pipe, which is not easy to cause debris to accumulate, so that the fluid can flow unobstructed. The valve body is made of precision casting, and the precise geometric dimensions make the inside of the valve body without any finishing to ensure the sealing of the valve. The copper nut adopts an embedded structure, and the copper nut and the elastic gate adopt embedded joint, so that the two are tightly combined into one, and there is no loosening or damage caused by vibration caused by water flow. The valve body is coated with powder epoxy resin, which can prevent corrosion and rust of the valve body and can be used in sewage system. The valve stem seal adopts three O-ring sealing design, which can reduce the frictional resistance when closing, greatly reduce the phenomenon of water leakage, and can replace the sealing ring without water construction. Since the inside of the valve body is coated with non-toxic epoxy resin, the inner and outer surfaces of the valve are completely covered with rubber without rusting or corrosion, which can be used for drinking. The gate is made of high-quality rubber for the overall inner and outer rubber. The first-class rubber vulcanization technology enables the vulcanized gate to ensure accurate geometric dimensions, and the rubber and the ductile cast gate are firmly bonded, not easy to fall off and have good elastic memory. In the past, traditional cast iron gate valves were often broken due to foreign objects hitting, colliding or heavy pressure. Due to the use of ductile iron for the body, this situation can be greatly reduced. Standard specification of elastic seated gate valve: Design and manufacture according to: GB12232 Structure length and flange connection size according to: GB12380 JISB2002 Structure and experiment according to: GB/T13927 Common code remarks for elastic seated gate valve Remarks RVXX means rising stem gate valve, RVXP means labor-saving device. RRXX stands for rising stem gate valve. RRHX stands for open rod type with handwheel. RREX stands for open rod type with electric operating device. RVCX means non-rising rod type with drive cap. RVHX means non-rising rod type with handwheel. RVHS stands for non-rising pole signal display. RVEX means non-rising rod type with electric operation device. RVCH stands for non-rising rod type horizontal operating device with drive cap. RVHH means non-rising rod type horizontal operating device with handwheel.
Lianke Valve Co.,Ltd. is deemed as one of the leading provider of valve application products in China.
If you are interested in any of valve application, please feel free to contact us.
To strengthen and grow our leadership position by providing valve application across a range of market segments, including types of industrial valves, and high-performance servers.
valve application are raising the stakes of social marketing, but they also ease the sales process by providing ways for types of industrial valves to effectively interact with customers.