Common Mistakes in T Strainer Selection and How to Avoid Them

A T type strainer may seem like a simple filtration device, but making a bad choice when getting one might just throw your system off balance. Even a small oversight in selection can lead to pressure drops or premature equipment wear. Steer clear of these mistakes, and your system will run smoother and last longer.

Top Mistakes to Avoid

Keep T strainers in tiptop condition by avoiding these common pitfalls.

Mistake 1: Choosing Strainer and Mesh Size by Guesswork

Strainer and mesh sizing errors top the list. 

If your strainer’s too big, you’ll be paying for unused capacity. However, if it’s too small for the system’s flow rate, then it may result in sharp pressure drops, quicker clogging, and flow instability. As a result, your pump must work harder to maintain flow, potentially shortening its lifespan.  

Similarly, proper mesh size selection is critical as it’s the core of the system’s filtration. Go too fine, and clogging will become a routine. Go too course, and debris slips through, damaging downstream equipment in the process.  

Mistake 2: Selecting Incompatible Materials

Coladores en T can be made from different materials. To choose the correct one, you’ll need to look at the type of fluid your system handles. Otherwise, you risk corrosion, contamination, or even shutdowns. 

• Carbon Steel – An affordable solution for high-pressure and temperature systems and applications where corrosion isn’t an issue.
• Acero inoxidable – Ideal for fluid systems requiring corrosion resistance and cleanliness.   
• Alloy Steel – Handles very high pressure and temperature demands, offering superior strength and durability at a cost. 
• Iron – Budget-friendly and commonly used for non-corrosive applications with low to moderate pressure and temperature demands. 

Mistake 3: Assuming One Basket Fits All

If you’re dealing with non-standard contaminants or high-debris loads, consider getting a customized basket T-type strainer instead to provide a more tailored performance. It can:

• Handle unusual particle sizes
• Extend maintenance intervals
• Improve filtration efficiency. 

Mistake 4: Forgetting Maintenance 

A T strainer may be built to last, but it can still fail if it’s not maintained correctly. Scheduling regular inspections and maintenance can help you catch clogs before they escalate. 

How to Avoid These Mistakes

Avoiding these errors is about planning and precision:

• Confirm flow rate, pressure, and debris size before choosing a T strainer.  
• Always review the T type strainer specification and match it to your system’s requirements.
• Choose a customized basket T type strainer when standard options fall short.
• Create a maintenance schedule and implement it. 

Preguntas frecuentes

1. What makes a T strainer different from a Y strainer? 

A T type strainer has a larger basket and longer service life, making it ideal for high-debris loads and systems. 

2. Do customized basket T-type strainers cost much more?

Only slightly, but its better performance and reduced downtime usually offset the initial cost. 

3. Can a strainer handle high-viscosity fluids?

Yes, but for this, a coarser mesh and a low-pressure-drop design work best to minimize clogging and maintain sufficient flow. 

Get the Right T Type Strainer for Reliable Flow

Getting the right T type strainer for your applications is essential in keeping your pipelines at their peak. Doing so can prevent system failure and protect equipment at the same time. 

Our company, LIANKE, offers premium filtration solutions for various industries worldwide. Explore our products o call our experts today for more information.